CNC V Groove Machine 1500×4000
CNC V Grooving Machine

CNC V Groove Machine 1500×4000

V-Grooving machines for the Solid Surface Industry, as well as several other models for the manufacturers of Speaker & TV Cabinets, Fixture & Display and Architectural Millwork companies. There are hundreds of V-Grooving applications.
CNC V Groove Machine 1500×4000
1.It is the upgraded machine based on SMART series
2.With ball screw as powered driving component with high precision, especially for high-end products
3.Hydraulically hold sheet metal with larger and reliable holding forces as well as low noise and energy consumption
4.Frame type structure connected with high-strength bolt
5.The stress of working table relieved by electrical boiler with high rigidity and low deformation
6.Working table is made of carbon tool steel with HRC 55~60 degree hardness and ≤±0.03mm flatness to absolutely solve the low V slot precision problem due to deformed table
6.Fixed cross-beam, and sheet metal feeded in by back feeding device
7.With front and back supporter on working table to avoid scratching during processing
8.Easy CNC operating system with interlocking protection. The machine will automatically produce by inputting parameters
9.International standardized electrical components
10.With fan cooler in electrical cabinet
11.Remote monitor and control CNC system
  1. Main specification
No Name Model Unit
1 The width of grooving 1500 mm
2 The length of length 4000 mm
3 The thickness of groovingStainless steel 0.5-6.00 mm
4 The Min thickness of plate 0.5 mm
5 Min side distance 8-12 mm
6 X axis working speed 70 m/min
7 X axis return speed 85 m/min
8 Z axis max distanceback-gauge) 1250 mm
9 Y1 axis resolution(Blades head ) 0.001 mm
10 Repeat positioning accuracy ±0.01 mm
11 Repeat positioning accuracy ±0.01 mm
12 Motor power X axis 4.5 kw
Y, Z axis 1
13 Machine size Length 5850 mm
Width 2200
Height 2110
14 Machine weight 13000 KGS
No Name Brand
1 CNC system HUST,Taiwan or Japan ABEL(15inch touch screen)
2 Hydraulic system YUKEN,Japan
3 Frequency converter Germany
4 Servo motor Japan
5 Seal ring VALQUA,Japan
6 Bearing NSK,Japan
7 Air switch Schneider
8 Contactor Schneider
9 Breaker and button Schneider
10 Relay Schneider
11 Blades KORLOY,Korea
12 Linear guide HINWIN, Taiwan
13 Wire IGUS, Germany
14 Bearing NSK,Japan
15 4 PCS front supporter Korea
Creating precise, sharp angles and folds with V-Grooving machinery
Bending metal using a V-Grooving machine allows it to be folded to a tight radius, or sharp corner. This enables folded metal to mimic solid bar material at around a tenth of the cost and also avoids wastage. V-Grooved profiles look just like solid bar material but are light in weight and easier to transport and install.
We can V-Groove and fold up to 4 metre lengths of material and thicknesses from 0.8mm to 6mm.

The V-Grooving machine in action

Depending on the thickness of the material and the type of fold required, the V-Groove machine cutting head will run a programmed number of times along the sheet material.

A way to achieve cost-effective high-specification finishes for today’s architects and interior designers

Architects aiming to achieve upmarket, high-specification interiors and finishes rather than specify solid materials can utilise V-Grooved folding. This method of creating solid-looking trims, architraves and skirting enables endless design options.
Using PVD stainless steel, the V-Grooving process is used to create colour-matched display fixtures, fascias, curtain-walling and cladding.
Where contractors are dealing with an existing specification for solid material this can be value-engineered to V-Grooved profiles with no loss of aesthetic. For boutique hotels and luxury retail brands these lightweight V-Grooved profiles are a cost-effective alternative.
For exterior cladding and curtain-walling V-Groove folds allow for seamless butting-up or can create decorative shadow gaps.
V-Grooving is also called score-folding, V-cutting and back-scoring.