Hydraulic Swing Beam Shear machine
Categories
Press Brake
CNC Press Brake
NC Press Brake
Tandem Press Brake
Full Automatic Bending Cell
CNC Hydraulic Folding Machine
Press Brake Die/Toolings/Punch/Blades
Hydraulic Shear Machine
Laser Cutting & Welding ...
Plate Rolling Machine
CNC V Grooving Machine
CNC Horizontal V Grooving Machine
CNC Vertical V Grooving Machine
Pipe Bending Machine
Wire Bending Machine
Punching Press Machine
Hydraulic Shear Machine
Home > Hydraulic Shear Machine
Swing Beam Shear Machine(Smart Series)
Swing Beam Shear Machine(Smart Series) Swing Beam Shear Machine(Smart Series) Swing Beam Shear Machine(Smart Series) Swing Beam Shear Machine(Smart Series) Swing Beam Shear Machine(Smart Series)

Swing Beam Shear Machine(Smart Series)

This series of shears mark our new-developed hydraulic swing beam shear with advanced designing, top configuration and stylish look, good rigidity, high shearing precision and desirable efficiency.
INQUIRY
Description Specification Optional
MS5 SMART SERIES Hydraulic Swing Beam Shear
Introduction:
This series of shears mark our new-developed hydraulic swing beam shear with advanced designing, top configuration and stylish look, good rigidity, high shearing precision and desirable efficiency.
Main advantage:
◇ Less returning impact, more strokes
◇ Reduce of throat depth and oil tanks’changes of installation style from suspending to welding style improve the strength and anti-torque of whole frame
◇ More reliable clearance adjusting mechanism.
◇ Build-in spring for hold-down, NOK seal from Japan, convenient replacement of hold-down, reliable sealing performance.
◇ Observation point on cylinder plate, NOK seal, guider material with Fabric phenolic resin, possible to check the statement of cylinder and holding plate, improving performance of sealing and guiding.
◇ Synchronous belt and pulley of back-gauge, improving stability and speed of back-gauge.
◇ Suspending arm with welding structure, large section and good rigidity. 
Swing beam shear standard configuration:
1 Hydraulic swing structures, blade beam nitrogen cylinder return.
2 Clip-and -sleeve pipe system.
3 Manual blade clearance adjustment
4 Standard front guard
5 Safe pedal.
6 with cutting stainless steel blades(material 6CrW2Si).
7 Valve:Rexroth, Germany
8 Motor:Siemens,Germany.
9 Pump:SUNNY,USA.
10 Electrical element:Schneider.
11NOK Japan layer seals for main cylinders.
12 Estun E21S system control.
13Three emergency stop.
14Electrical cabinet with switch power outage.
15Optional controller E200,DAC360S
Please see the video as following:

                   Hydraulic Shearing Machine With Pneumatic Supporter 



 
MAIN SPECIFICATIONS
Type Cutting thickness Cutting width Shear angle (°) Material
strength
(KN/cm)		 Back gauge range
(mm)		 Strokes
(N/Min)		 Motor power
(KW)		 Overall dimension
(L×W×H)
(mm)
4x2000 4 2000 1°30′ ≤450 20～500 14 5.5 3040×1550×1550
4x3200 4 3200 1°30′ ≤450 20～500 12 5.5 3840×1550×1550
4x4000 4 4000 1°30′ ≤450 20～600 10 5.5 4600×1700×1700
4x6000 4 6000 1°30′ ≤450 20～800 5 7.5 6460×2100×2200
6x2500 6 2500 1°30′ ≤450 20～500 14 7.5 3040×1710×1620
6x3200 6 3200 1°30′ ≤450 20～500 12 7.5 3840×1710×1620
6x4000 6 4000 1°30′ ≤450 20～600 9 7.5 4620×1850×1700
6x5000 6 5000 1°30′ ≤450 20～600 8 7.5 3140×1710×1620
6x6000 6 6000 1°30′ ≤450 20～800 5 11 6480×2100×2300
8x2500 8 2500 1°30′ ≤450 20～500 11 7.5 3040×1700×1700
8x3200 8 3200 1°30′ ≤450 20～500 8 7.5 3860×1700×1700
8x4000 8 4000 1°30′ ≤450 20～600 8 7.5 4640×1700×1700
8x5000 8 5000 1°30′ ≤450 20～600 8 7.5 5400×2400×2000
8x6000 8 6000 1°30′ ≤450 20～800 8 11 6480×2100×2350
10x2500 10 2500 1°30′ ≤450 20～500 10 11 3040×1800×1700
10x3200 10 3200 1°30′ ≤450 20～500 10 11 3860×2000×1700
10x4000 10 4000 1°30′ ≤450 20～600 10 11 4650×2100×2000
10x6000 10 6000 1°30′ ≤450 20～800 10 15 6500×2100×2300
12x2500 12 2500 2° ≤450 20～600 12 18.5 3140×2050×2000
12x3200 12 3200 2° ≤450 20～600 10 18.5 3880×2150×2000
12x4000 12 4000 2° ≤450 20～600 10 18.5 4680×2150×2100
12x5000 12 5000 2° ≤450 20～600 6 18.5 3240×1900×1900
12x6000 12 6000 2° ≤450 20～1000 5 18.5 6900×2600×2700
16x2500 16 2500 2°30′ ≤450 20～600 10 18.5 3140×2150×2000
16x3200 16 3200 2°30′ ≤450 20～600 10 18.5 3880×2150×2000
16x4000 16 4000 2°30′ ≤450 20～800 10 18.5 4650×2150×2200
16x5000 16 5000 2° ≤450 20～1000 6 18.5 5900×2600×2700
16x6000 16 6000 2° ≤450 20～1000 5 22 6900×2700×2700
20x2500 20 2500 3° ≤450 20～800 8 22 3440×2300×2500
20x3200 20 3200 3° ≤450 20～800 8 22 4150×2350×2700
20x4000 20 4000 3° ≤450 20～1000 5 22 4850×2600×2400
20x6000 20 6000 3° ≤450 20～1000 4 22 6700×3000×3000
25x2500 25 2500 3° ≤450 20～1000 8 37 3200×2700×2900
25x3200 25 3200 3° ≤450 20～1000 5 37 4200×2400×2500
30x2500 30 2500 3° ≤450 20～1000 4 37 3300×2900×2000
30x3200 30 3200 3°30′ ≤450 20～1000 4 40 4200×2500×2600
40x2500 40 2500 4° ≤450 20～1000 3 75 3200×3300×3200
40x3200 40 3200 4° ≤450 20～1000 3 90 4300×3300×3000
Name Introduction Reference Pictures                
ESTUN E21S NC Types, ESTUN,China(standard)  
ESTUN E210S CNC Types, Back-gauge, shear angel,clearance adjust and cutting stroke  
Holland DELEM DAC360 CNC Types, Back-gauge, shear angel,clearance adjust and cutting stroke  
Germany ELGO P40 CNC Types, Back-gauge, shear angel,clearance adjust and cutting stroke  
Safety light curtain OMRON,Japan
LNTECH,China		  
Oil Cooling Decrease the hydraulic oil degree,working long time  
Pneumatic rear supporter The pneumatic rear supporter is featured to process long and thin plates to improve the accuracy and reduce workload on machine  
Special length of front beam For support long plate  
Angle protractor positioning device Position plate when cut different angle  
Special length back safety. Special CE standard  
Automatic loading Automatic loading plate  
CNC Control front feeding shear machine Automatic push the plate cutting and positioning
Email
We-Chat
Whatsapp Skype