H-Frame Deep Drawing Hydraulic Presses

This machine adopts an integral frame type eight-sided guide rail structure, which has good anti-eccentric load ability, high guiding precision, and adopts centralized automatic lubrication guide rail. Ensure high-precision product requirements.
The midd

INQUIRY

PDF Format

Description

H-Frame Deep Drawing Hydraulic Presses
Features:
Frame steel welded whole or split structure, South Korea to take vibration or tempering rigidity; high precision. Hydraulic control cartridge valve integrated system, the impact of small, reliable action, long service life, less leakage point. New cylinder seal components, high reliability, and long life. Stretch, pressure slider can be connected into one, to achieve a single action process. Rail automatic lubrication devices, mechanical and electrical integration of security devices. Such as: fuel tank under the cavity support circuit, the cylinder chamber interlock loop, superior security. The electrical system uses the PLC control. Can achieve constant pressure fixed range two forming process, with pressure-holding delay function, adjustable delay time. Working pressure, stroke can be regulated within the specified range according to process requirements, easy to operate.
Applicable fields:
Applicable to all stretching and bending, forming and other processes. Large cars, agricultural vehicles covered parts and other parts. Boiler head, liquefied petroleum gas tank, stainless steel hand-washing slot, bath and so on. Ships, aviation, aerospace and other fields.
Optional accessories or functions: photoelectric protection device, mobile table, floating rail and rolling bracket for mold change, punching buffer device, mold quick clamping device, touching industrial display, stroke, pressure, speed digital display numerical control device, Hydraulic system heating, cooling device, displacement heat transfer device. Pressure side slider, hydraulic pressure were four corners device (tensile asymmetric parts).
Product Features
1. High efficiency and energy saving, the power consumption is 30% -50% less energy than ordinary motors.
2. Low noise, the noise can be controlled at about 60 decibels.
3.The working position, speed and pressure can be adjusted steplessly.
4. Quick response, high pressure and position repeat accuracy.
5. High efficiency, multiple protections inside, and extremely low failure rate.
6.12 hours of continuous work without cooling oil temperature.
7.Pipes and joints adopt SEA international standards to prevent pipeline oil leakage.
8.Adopt button centralized control, (fixed distance / constant pressure) two control methods, (adjustment / automatic) two operation methods
9.European CE standard hydraulic system and electrical appliance safety IP54 level.
Spec

Type		Unit	40T	63T	100T	200T	250T	315T	400T	500T	800T	1000T
Nominal pressure		KN	400	630	1000	2000	2500	3150	4000	5000	8000	10000
Maximum working pressure		Mpa	22.2	24.3	25.8	24.4	25.5	24.6	24.7	25	24.4	25.5
Maximum opening height		mm	600	700	900	1100	1100	1250	1400	1500	1800	1800
Lift out force		KN	63	100	250	400	400	630	1000	1000	2000	2000
Ejector stroke		mm	120	160	200	250	250	300	300	300	3500	400
Stroke ram		mm	400	450	600	700	700	800	800	900	1000	1000
Ram speed	Approaching	Mm/s	40	40	76	100	100	100	100	100	100	120
	Working	Mm/s	10	10	8-15	8-15	8-15	8-15	8-15	5	5-12	5-12
	Return	Mm/s	60	60	85	100	100	100	100	100	90	90
The size of working table	F-B	mm	400	500	710	900	1000	1200	1300	1400	2400	2500
The size of working table	L-R	mm	400	500	580	900	1000	1200	1300	1400	1600	1800
Size of the machine	F-B	mm	1484	1900	2650	2780	2900	3440	3440	4100	4400	4500
	L-R	mm	1000	1150	1150	1350	1450	1550	1550	1650	1850	2000
	Above ground	mm	2406	2430	3300	3900	4000	4600	4750	5348	5600	5700
Main motor power		KW	5.5	5.5	7.5	11	11	18.5	18.5	37	74	74
Total weight(approx)		Ton	4.5	6	8	16	18	28	28	42	70	95